HomeProductsRexroth series electromagnet

Model description


Normal operating conditions

1. It can be installed in any direction; Suitable for long-term working system and intermittent periodic working system;

2. There shall be no gas and dust that can corrode metal and damage insulation in the service environment

3. The reasonable fluctuation range of power supply voltage is 85% - 110%, and the enclosure protection grade is IP65.

Precautions for use

1. The plug electromagnet has two specifications: with indicator light and without indicator light. You can choose according to your needs.

2. The power supply voltage specification of the electromagnet must be consistent with the voltage specification of the electromagnet body.

3. The manual push rod of electromagnet is used for manual control during commissioning or in case of emergency. When the back pressure of the system is high and it is difficult to adjust, please use a cross screwdriver to slowly push the manual push rod. Impact force should not be used to avoid damaging the surface of the manual push rod and the guide inner hole, resulting in oil leakage or failure to reset the electromagnet.

4. When two-way electromagnets are used, it must be ensured that the two electromagnets cannot be energized at the same time to avoid burning the electromagnets.

5. An overcurrent protection device shall be set between the electrical control system and the connecting part of the electromagnet to avoid burning the electromagnet and your electric control components under abnormal conditions.

Sample description

1. Under the condition that the performance of the electromagnet remains unchanged, the connection size between the electromagnet and the valve body, the extension length of the push rod and the working power supply voltage can be adjusted according to the customer's requirements.

2. The travel force characteristic curve is for reference only.

3. The main characteristic parameters are obtained under laboratory conditions. The company reserves the right to modify parameters. 4. The electromagnets normally supplied are not waterproof. If waterproof is required, please give special instructions when ordering.

12 共15条 2页,到第 确定